FPV-Cockpit-v3

FPV-Cockpit-v3 is built from Telemetry Container, Seven-Segment Display, Gauge, Attitude Indicator, Bar Gauge, Compass and 1 more. It is organised into pages named FLIGHT, POWER and LINK.

• Label showing Clock.
• Label showing Ground Speed (km/h).
• Label showing Vertical Speed (m/s).
• Attitude Indicator driven by Roll (°) and Pitch (°).
• Seven-Segment Display showing Altitude (m).
• Label showing TX Power (mW).
• Seven-Segment Display showing Capacity Used (mAh).
• Bar Gauge for Receiver Battery from 9 to 12.6 V, color-coded with bands changing at 10.5 and 11.1 V.
• Gauge for Current from 0 to 60 A.
• Telemetry Container labelled "RSSI" showing Antenna 1 RSSI (dB).
• Telemetry Container labelled "SNR" showing RX Signal/Noise (dB).
• Telemetry Container labelled "SATS" showing GPS Satellites.

It reads Clock, Ground Speed (km/h), Vertical Speed (m/s), Roll (°), Pitch (°), Altitude (m), TX Power (mW), Capacity Used (mAh), Receiver Battery (V), Current (A), Antenna 1 RSSI (dB), RX Signal/Noise (dB) and 4 more from your radio. Values update live as the sensors report them, so discover the sensors in your model before adding the widget.

On-screen text includes: “FLIGHT”, “ALT m”, “SPEED”, “V-SPEED”, “POWER”, “USED mAh”, “TX POWER”, “LINK”, “WIDGETTX FPV”.

FPV-Cockpit-v3 is laid out for 480x272 color screens and runs as a Lua widget on EdgeTX 2.8 or newer. Radios with a 480x272 screen:

• FrSky X20S (Tandem) (touchscreen)
• FrSky X20 (Tandem) (touchscreen)
• FrSky X12S (touchscreen)
• FrSky X10S / X10S Express (touchscreen)
• RadioMaster TX16S Mark II (touchscreen)
• RadioMaster TX16S MAX (touchscreen)
• RadioMaster TX16S (touchscreen)
• RadioMaster TX15 Max (touchscreen)
• RadioMaster TX15 (touchscreen)
• FlySky NV14 (Nirvana) (touchscreen)
• FlySky EL18 (Elysium) (touchscreen)
• FlySky PL18 (touchscreen)
• FlySky PL18U (touchscreen)

1. Click Download to get FPV-Cockpit-v3 as a ZIP built for 480x272 screens.
2. Unzip it. It contains a WIDGETS folder holding the widget's own folder, with main.lua and any images it uses.
3. Copy that folder into /WIDGETS/ on your radio's SD card, so the script ends up at /WIDGETS/<folder>/main.lua.
4. Restart the radio, open the screen setup, choose a widget zone and select FPV-Cockpit-v3.

In Chrome or Edge you can skip the copying: Install (Connect SD Card) writes the files straight to the SD card.

Created by

Ensar Hajredini

Published

October 29, 2026

Last updated

October 29, 2026

Screen resolution

480x272

Downloads

0

Favorites

0

Forks

0