FPV-Cockpit-20261030-2248

FPV-Cockpit-20261030-2248 is built from Telemetry Container, Seven-Segment Display, Gauge, Tab Bar, Attitude Indicator, Bar Gauge and 1 more. It is organised into pages named FLIGHT, POWER and LINK.

• Label showing Clock.
• Attitude Indicator driven by Roll (°) and Pitch (°).
• Seven-Segment Display showing Altitude (m).
• Telemetry Container labelled "SPEED" showing Ground Speed (km/h).
• Telemetry Container labelled "V-SPEED" showing Vertical Speed (m/s).
• Bar Gauge for Receiver Battery from 9 to 12.6 V, color-coded with bands changing at 10.5 and 11.1 V.
• Gauge for Current from 0 to 60 A.
• Seven-Segment Display showing Capacity Used (mAh).
• Telemetry Container labelled "TX POWER" showing TX Power (mW).
• Gauge for RX Link Quality from 0 to 100 %.
• Compass showing Heading (°).
• Telemetry Container labelled "RSSI" showing Antenna 1 RSSI (dB).

It reads Clock, Roll (°), Pitch (°), Altitude (m), Ground Speed (km/h), Vertical Speed (m/s), Receiver Battery (V), Current (A), Capacity Used (mAh), TX Power (mW), RX Link Quality (%), Heading (°) and 4 more from your radio. Values update live as the sensors report them, so discover the sensors in your model before adding the widget.

On-screen text includes: “FLIGHT”, “ALT m”, “POWER”, “USED mAh”, “LINK”, “WIDGETTX FPV”.

FPV-Cockpit-20261030-2248 is laid out for 480x272 color screens and runs as a Lua widget on EdgeTX 2.8 or newer. Radios with a 480x272 screen:

• FrSky X20S (Tandem) (touchscreen)
• FrSky X20 (Tandem) (touchscreen)
• FrSky X12S (touchscreen)
• FrSky X10S / X10S Express (touchscreen)
• RadioMaster TX16S Mark II (touchscreen)
• RadioMaster TX16S MAX (touchscreen)
• RadioMaster TX16S (touchscreen)
• RadioMaster TX15 Max (touchscreen)
• RadioMaster TX15 (touchscreen)
• FlySky NV14 (Nirvana) (touchscreen)
• FlySky EL18 (Elysium) (touchscreen)
• FlySky PL18 (touchscreen)
• FlySky PL18U (touchscreen)

1. Click Download to get FPV-Cockpit-20261030-2248 as a ZIP built for 480x272 screens.
2. Unzip it. It contains a WIDGETS folder holding the widget's own folder, with main.lua and any images it uses.
3. Copy that folder into /WIDGETS/ on your radio's SD card, so the script ends up at /WIDGETS/<folder>/main.lua.
4. Restart the radio, open the screen setup, choose a widget zone and select FPV-Cockpit-20261030-2248.

In Chrome or Edge you can skip the copying: Install (Connect SD Card) writes the files straight to the SD card.

Created by

Ensar Hajredini

Published

October 30, 2026

Last updated

October 30, 2026

Screen resolution

480x272

Downloads

0

Favorites

0

Forks

0